Department of Mechanical

Figure show part of the Compressor blade(During C-inspection)



Figure show part of the gas turbine(During C-inspection)



Figure show worker try to lift the rotor of gas turbine by using crane(During C-inspection)



Go to the HRSG of GT-32 help on open top header manhole,bottom header manhole,LP and HP drum manhole and install blower for the purpose of c-inspection of GT-32 gas turbine.

Go to the HP continues blow-down metering of GB3 help on replace the pipe.Observe on technician on how to cut, replace and weld the pipe.Go to the GT-32 of the lube oil vapor extraction fan help on replace hardened hose guide by technician.

Go to the the GT-32 help on install the sampling valve guide by technician.Function of the sampling valve is to take sample of the lube oil for checking the condition of lube oil.Go to the fuel gas dust filter help on open and take out the filter of the fuel gas dust filter for cleaning the filter guide by technician.go to GT-32 to know on the progress of the inspection of gas turbine.Observe on the open cover of the gas turbine for compressor, burner and generator. observe on the turbine and compressor blade.

Go to the condenser tube cleaning (CTC) pump ST-14 to help on replace the coupling because damage.Go to the GT-32 observe on the lifting and take out the gas turbine for inspection. study on the gas turbine part such as compressor blade, gas turbine blade,damping bolt, balancing hole and etc.